Kern-sohn FL 2K Manual do Utilizador descarregar pdf (Página 6)

Sauter GmbH

Ziegelei 1

D-72336 Balingen

Tel: +49-[0]7433- 9933-199

Fax: +49-[0]7433-9933-149

Internet: www.kern-sohn.com

Instruction Manual

FL-BA-e-1411 6

11. Measurement practice

For best measurement accuracy keep the

compression/tension forces in line with the force gauge.

Alleviate bending loads and torque loads applied to the

load cell as these can adversely affect measurement

performance.

Always keep the gauge below the capacity limit shown on

the front of the gauge. If gauge is used above this capacity

in either tension or compression, even for a short time,

permanent load cell damage can result. Overload damage

is not covered by warranty.

Accuracy: ± 0.2 % of rated capacity

Operating temperature: 60 ºF - 95 ºF (15 ºC - 35 ºC)

Temperature shift at zero load: ± 0.04 % of full-scale/ºC

Output

RS-232 and USB: 8 data bits, 1 Start bit, 1 Stop bit, no

parity

Baud rate: 38400

Peak Capture Rate : 0.100 S

ADC Sampling Rate : 1,000 Hz

12. Declaration of Conformity

1 2 3 4 5 6

Sem comentários

Kern-sohn FL 2K Manual do Utilizador Página 6