Kern-sohn KDE-T Manual do Utilizador descarregar pdf (Página 15)

15 KDE-T-BA_IA-e-1210

7.5 Weighing with tare

 Deposit weighing vessel. After successful standstill control press the

button. The zero display appears. The weight of the container is now internally

saved.

 Weigh the material, the net weight will be indicated.

 After removing the weighing container, the weight of the weighing container

appears as negative display.

 The tare procedure can be repeated as many times as necessary, for example

with initial weighing of several components for a mix (add-on weighing). The limit

is reached when the total weighing range capacity is full.

 To delete the tare value, remove load from weighing plate and press .

7.6 Pre-Tare function

Setting the pre-tare function:

Using this function the weight of a tare vessel can be stored.

This value also remains saved if the balance meanwhile has been switched off and

switched on again.

 Turn on weighing scale by and wait for zero to be displayed.

 Put on empty vessel and press repeatedly until a flashing display of

“PrEtArE” appears.

 Press . The current weight on the weighing pan will be saved as pre-tare

weight.

 Weigh the material, the net weight will be indicated.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 45 46

Sem comentários

Kern-sohn KDE-T Manual do Utilizador Página 15