KERN & Sohn GmbH Ziegelei 1 D-72336 Balingen E-Mail: [email protected] Phone +49-[0]7433- 9933-0 Fax: +49-[0]7433-9933-149 Internet: www.kern-so
3 Basic Information (General) 3.1 Proper use The balance you purchased is intended to determine the weighing value of material to be weighed. It is
4 Basic Safety Precautions 4.1 Pay attention to the instructions in the Operation Manual Carefully read this operation manual before setup and comm
6 Unpacking, Setup and Commissioning 6.1 Installation Site, Location of Use The balances are designed in a way that reliable weighing results are ac
6.3 Transport screw Remove the transport screw essential (available only at 6 kg model) To loosen the transportation lock, unscrew transporta
6.3.2 Scope of delivery / serial accessories: • Balance, see chap. 2 • Mains adapter • Protective cover • Instruction Manual 6.4 Mains connect
6.7 Adjustment As the acceleration value due to gravity is not the same at every location on earth, each balance must be coordinated - in compliance
4. Ensure that there are no objects on the weighing plate. Wait for stability display, then press . The required adjustment weight is shown. 5.
6.8 Verification UUGeneral: According to EU directive 90/384/EEC balances must be officially verified if they are used as follows (legally controll
6.8.1 Adjustment controls and seals Possible seals: enforced, and or 1. Seal mark 1 2. Cover 3. Verification switch 4. Verification wi
6.9.1 Service mode This overview of the service parameters is merely for checking the parameters set by the appropriate Bureau of Standards. No chang
GB KERN RPB_D Version 2.5 05/2014 Instruction Manual Price computing scales Contents 1 Technical data ...
Overview for service parameter: Factory settings are marked by [*]. Function Settings Description CAL F0 Adjustment function, see chpt
CAL F6 Display internal resolution XXX A-d CoUntS CAL F7 Coin Interval size currency Min Coin 1* Always use this setting Min Coin
7 Operation Mode 7.1 Turn on/off To turn on/off confirm forward at the underneath on the right of the scale and keep pressed for a little while.
8 Weighing with price determination As soon as the goods to be weighed are placed on the balance and the basic price has been set the price is calcul
8.1.1 Unit switch over €/kg to €/100 g The following parameters should be set for this: To carry out these settings please proceed as fo
Press (should „oFF“ not be displayed, press ) Press (should „on“ not be displayed, press ) Press again (should „on“ not be displ
8.2 Memory for basic price (PLU = Price look up) The balance is able to store up to 10 basic prices. Save: Enter basic price via the numeric keys
Before calling-up an other PLU, the displayed basic price has to be deleted by . Calculating the change: Press at the display sales price (
9 Additional useful functions 9.1 AUTO CLEAR Enable: To enable the AUTO-CLEAR function press ; the arrow above „“AUTO CLEAR“ will start flashi
9.3 AUTO POWER OFF To save the rechargeable battery (option), the automatic switch-off function can be activated, switch-off time selectable after 0,
10 RS 232 interface ... 30 10.1 Technical data ...
10 RS 232 interface 10.1 Technical data RS 232 connection to output of weighing data ASCII code Baud rate 600, 1200, 2400, 4800, 9600 8 data bits No
11 Service, maintenance, disposal 11.1 Cleaning Before cleaning, please disconnect the appliance from the operating voltage. Please do not use aggres
12 Instant help In case of an error in the program process, briefly turn off the balance and disconnect from power supply. The weighing process must
13 Declaration of -Conformity KERN & Sohn GmbH D-72322 Balingen-Frommern Postfach 4052 E-Mail: [email protected] Tel: 0049-[0]7433- 9933-0 Fax:
1 Technical data Models without vertical display: KERN RPB 6K1DM RPB 15K2DM RPB 30K5DM Weighing range (max) 3 kg / 6 kg 6 kg / 15 kg 15 kg / 3
Models with post-mounted display: KERN RPB 6K1DHM RPB 15K2DHM RPB 30K5DHM Weighing range (max) 3 kg / 6 kg 6 kg / 15 kg 15 kg / 30 kg Readabili
2 Appliance overview Models without vertical display: Models with post-mounted display: 1. Weighing plate / rechargeable battery compartment (u
Weight Basic price Sales price 2.1 Overview of display Operator and secondary display (standard on the backside of models without post-mou
Display weight Here, the weight of your goods is displayed. Indicator next to symbol displays: Battery very low GROSS�Gross weight NET Net weight
2.2 Keyboard overview Bubble level Selection Function ~ 3 Numerical keys, PLU-keys • Delete • Save basic price (press and hold key for a
Comentários a estes Manuais